Product Specification
The Monnet structural steel products are currently available from its Raipur works and also through a network of dealers located strategically across India.
Product Range :
- Channel Section (ISMC) :
150×75 mm, 200×75mm, 250×80mm, 300×90mm, 350×100mm, 400×100mm. - Equal Angle Section (ISA) :
100×100mm, 130×130mm, 150×150mm, 200×200 mm in various thickness. - Beams/Joists Section (ISMB) :
200×100mm, 250×125mm, 300×140mm, 350×140mm, 400×140mm, 450×150mm, 500×180mm.
Length Range : 11 m to 13 m, 5.5m to 6.5m
Customized length could be supplied based on supply conditions.
Grade of Material : As per 15:2062, Fe 410 Grade: A/E250
Higher grade material could be supplied based on supply condition.
Size Tolerance/Weight Tolerance : As per BIS Standard IS:1852
Chemical Composition :
| Chemical | Symbol | % Limit |
| Carbon | C | 0.23% Maximum |
| Manganese | Mn | 1.5% Maximum |
| Silicon | Si | 0.40% Maximum |
| Sulphur | S | 0.055% Maximum |
| Phosphorus | P | 0.055% Maximum (Tolerance: ± 0.005) |
Physical Properties :
| Material will be supplied in semi-killed/killed(Al.) condition with limiting carbon equivalent | 0.42% max |
| Minimum Yield Strength | 250 Mpa |
| Minimum Tensile Strength | 410 Mpa |
| Minimum % Elongation | 23 |
Weldability : Weldable with common M.S. Electrodes without pre-heating.
Marking/Identification of Product : Every Structural Section is embossed (hot rolling) with size detail, ISI mark and Co’s logo/Mark along the length at regular interval.
Quality/Test Certificate : All product are supplied compulsorily with the works test certificate as per IS:2062 stipulations. However, third party inspection, if desired by purchaser, can be organized at the plant before dispatch.
Ordering Information : While placing an order, the following technical information would be needed :
- Size & length of each piece and quantity.
- Steel specification with grade/chemical composition/physical properties.
- Test certificates requirement
- Special requirements if any.